5 OPERATING THE PRINTER
This chapter explains basic steps in operating the 380mc.
BASIC USER OPERATIONS
POWERING ON THE PRINTER
To power the printer ON:
1.
Ensure that the AC disconnect switch is in the ON (I) position and then ensure that the AC circuit
breaker is in the ON (I) position. (See
circuit breaker location.)
2.
Press the green Power ON button on the front of the printer.
3.
The printer will begin to boot. The touchscreen will turn on and the Stratasys logo followed by
start-up code will be displayed for a brief period.
Figure 5-1:
Power On/Power OFF Button Location
Figure 2-7 on page 18
for AC disconnect switch and AC
116
Power ON button
(green button)
Power OFF button
(red button)