Operating The Printer; Basic User Operations; Powering On The Printer - Stratasys Origin One User Manual

Basic User Operations

5 OPERATING THE PRINTER

This chapter explains basic steps in operating the Origin One printer.
Basic User Operations

Powering ON the Printer

To power ON the printer:
1. Confirm the power and Ethernet cables are connected. See
Connection" (page 11)
2. Position the power switch to ON (see
The system boot cycle takes approximately 30 seconds. After the boot cycle is complete, a
green check mark and the printer name displays on the user interface screen (see
Figure
and "Connecting the Power Cable" (page
Figure 1: Power button location and back connections
2). This indicates the printer is powered on and connected.
Figure 2: Boot screen display message (successful)
© Copyright 2022-2023 Stratasys. All rights reserved.
Figure 1).
Powering ON the Printer
"Making the Network
12).

Page 27