Introduction; Manual Introduction; What This Chapter Contains; Applicable Firmware Versions - ABB BALDOR ACB530 User Manual

1.1 Manual Introduction

1.1.1 What This Chapter Contains

This chapter contains introductory information related to the ACB530 variable frequency drive. This drive provides
functionality that can be used to control many variable speed applications.
This manual contains information on:
• Delivery inspection
• Safety instructions (put in after delivery)
• Installing and wiring the ACB530 drive
• Programming the drive
• References related to manuals
The reader is expected to know the fundamentals of electricity, wiring, electrical components and electrical schematic
symbols.
The manual is intended for both US and global use.

1.1.2 Applicable Firmware Versions

The manual is applicable to the ACB530 drive fi rmware version

1.1.3 Purpose of the Manual

This manual provides information needed for planning the installation, installing, start-up, operating and servicing the drive.

1.1.4 Related Documents

See List of related manuals on page 2 (inside of the front cover).

1.1.5 Categorization by Frame Size

The ACB530 is manufactured in frame sizes R1 through R6. Frame site specifi c information is identifi ed in this manual with
the text R1 through R6. To identify the frame size of your drive, see the table in section Ratings.

1.2 Safety Notices

This equipment contains voltages that may be as high as 1000 volts! Electrical shock can cause serious or fatal injury.
Only qualifi ed personnel should attempt the start-up procedure or troubleshoot this equipment. This equipment may be
connected to other machines that have rotating parts or parts that are driven by this equipment. Improper use can cause
serious or fatal injury. Only qualifi ed personnel should attempt the start-up procedure or troubleshoot this equipment.

1.3 Use of Warnings

Warnings caution you about conditions which can result in serious injury or death and/or damage to the equipment, and
advise on how to avoid the danger. The following types of warnings are used in this manual:
Electricity warning warns of hazards from electricity which can cause physical injury and/or damage to the
equipment.
General warning warns about conditions, other than those caused by electricity, which can result in
physical injury and/or damage to the equipment.

1.4 Safety Related to Installation and Maintenance

These warnings are intended for anyone who works on the drive, power cables or motor.

1.4.1 Electrical Safety

WARNING! Ignoring the following instructions can cause physical injury or death, or damage to the
equipment.
Only qualifi ed electricians are allowed to install and maintain the drive!
MN796 - ACB530
Chapter 1
XXXXX or later. See Parameter

Introduction

3301 Firmware to confi rm.
Introduction 1-1