Table of Contents
Advertisement
SSG 500M-series Installation and Configuration Guide
Ethernet Port LEDs
12
Front Panel
Table 2: Device Status LED Descriptions (Continued)
Name
Color
Status
ALARM
Red
On steadily
Amber
On steadily
Off
HA
Green
On steadily
Amber
On steadily
Off
The Ethernet LEDs show the status of each Ethernet port. Figure 3 displays the
location of the LEDs on each Ethernet port.
Figure 3: Activity Link LEDs
TX/RX
LINK
Table 3 describes the Ethernet port LEDs.
Table 3: Ethernet Port LEDs
Name
Function
Color
LINK
Link
Green
TX/RX
Activity
Green
Description
Critical alarm:
Failure of hardware component or software
module
Firewall attacks detected
Major alarm:
Low memory (less than 10% remaining)
High CPU utilization (more than 90% in use)
Session full
Maximum number of VPN tunnels reached
HA status changed or redundant group member
not found
No alarms
Unit is the primary (master) device
Unit is the secondary (backup) device
High availability not enabled
State
Description
On steadily
Port is online
Off
Port is off line
Blinking
Port is receiving data
Off
Port might be on, but it is not receiving data
Advertisement
Table of Contents
