Maintaining Hardware Components; Maintaining The Srx110 Services Gateway Hardware Components - Juniper SRX110 Manual

CHAPTER 19

Maintaining Hardware Components

Maintaining the SRX110 Services Gateway Hardware Components

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
Maintaining the SRX110 Services Gateway Hardware Components on page 135
Table 46 on page 135 describes the common tasks to maintain the hardware components
of the services gateway.
Table 46: Maintenance Procedures for the Services Gateway Hardware
Components
Maintenance
Procedure Description
Routine Maintenance To maintain optimum performance of the services gateway, you should
Procedures regularly perform the following preventive maintenance procedures:
Maintaining the Power To maintain the power supply on the services gateway:
Supply
CAUTION:
connection.
Connecting the SRX110 Services Gateway to the Power Supply on page 101
Clearance Requirements for Airflow and Hardware Maintenance of the SRX110 Services
Gateway on page 40
Site Preparation Checklist for the SRX110 Services Gateway on page 35
Inspect the installation site for moisture, loose wires or cables, and
excessive dust.
Make sure that airflow is unobstructed around the device and into
the air intake vents.
Make sure that the power and grounding cables are arranged so that
they do not obstruct access to other device components.
Periodically inspect the site to ensure that the grounding and power
cables connected to the device are securely in place and that there
is no moisture accumulating near the device.
We recommend using a surge protector for the power
135