EN83CTLA SNMP Card
User Manual
Item
SNMP
4.6.4 Alarm Parameters
Enables or disables alarm information for components in the system.
Figure 4-16 Alarm Parameters
4.6.5 SNMP
Figure 4-17 SNMP
Issue 04 (2024-01-30)
Description
Refers to the SNMP used to
connect to the NetEco.
Disable: The SNMP services
are unavailable.
Read-only: Only the read
permission is enabled.
Settings are not allowed.
NetEco: The read permission
and the write permission on
related parameters supported
by the NetEco are enabled.
Enable: All functions are
available.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Default Value
Value Range
Enable
Disable, Read-
only, NetEco,
Enable
4 WebUI
26