Specifications; Safety Warnings - Makita TD00000111 Instruction Manual

Battery holder
Hide thumbs


Table of Contents
ENGLISH (Original instructions)


Rated voltage
Battery cartridge
USB power supply port
Dimensions (L x W x H)
Net weight
Some of the battery cartridges listed above may not be available depending on your region of residence.
Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injury and/or fire.
Some of the following symbols are used for the product.
Be sure to understand their meaning before use.
Read the instruction manual.
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the


Before use, be sure to read the
instruction manual of your Makita product to be
used with this appliance.
Use this appliance only with the
products specified by Makita. Using the appliance
with non-compliant products may result in a fire,
excessive heat, explosion, or leak of electrolyte.
Battery holder for LXT battery cartridge
D.C. 14.4 V
D.C. 18 V
BL1415N / BL1430B / BL1440 / BL1460B
BL1815N / BL1820B / BL1830 / BL1830B /
BL1840B / BL1850B / BL1860B
100 mm x 78 mm x 39 mm
(3-15/16" x 3-1/16" x 1-9/16")
0.14 kg (0.31 lbs)
Battery holder for CXT battery cartridge
D.C. 5 V, 2.4 A, Type A
Electrical safety
Do not handle the cord and battery with wet or
greasy hands.
Do not use a damaged USB cable.
Do not abuse the cord. Do not use the cord for
carrying, pulling or unplugging. Keep the cord
away from heat, oil, and sharp edges.
Do not leave any cord disconnected while the
battery power is supplied. Small children may
put the live plug in their mouth and cause injury.
Do not insert nails, wires, or other items into
the USB power supply port. Doing so may cause
short circuit, which can cause smoke or a fire.
Do not connect the power source to the
USB port. The USB port is only intended for
charging lower voltage devices. Always place
the cover over the USB port when not charging
a lower voltage device. Otherwise there is risk of
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack.
Use appliances only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
10. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
D.C. 10.8 V - 12 V max
BL1016 / BL1021B / BL1041B
88 mm x 61 mm x 33 mm
(3-1/2" x 2-3/8" x 1-5/16")
0.09 kg (0.20 lbs)


Table of Contents

  Related Manuals for Makita TD00000111

This manual is also suitable for:


Table of Contents