Specifications; Safety Warnings; Electrical Safety - Makita BL1055B Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

USB port D.C. 5 V, 1.5 A, Type C
Rated voltage capacity D.C. 10.8 V (16.75 Ah)
(internal battery)
Charging time 5 V / 1.0 A : 14 hours
5 V / 1.5 A : 12 hours
5 V / 2.4 A : 10 hours
Dimensions (L x W x H) 128 mm x 74.5 mm x 25 mm
(5" x 2-15/16" x 1")
Weight 0.37 kg (0.82 lbs)
WARNING:
Use products only with specifi-
cally designated battery. Use of any other battery
packs may create a risk of injury and fire.
Symbols
Some of the following symbols are used for the product.
Be sure to understand their meaning before use.
Read the instruction manual.
Only for EU countries
Li-ion
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Do not expose battery to water or rain.
Do not throw the battery in fire
Do not short-circuit the battery.

SAFETY WARNINGS

WARNING:
Before use, be sure to read the
instruction manual of your Makita product to be
used with this battery.
WARNING:
Use this battery only with the
products specified by Makita. Using the battery
with non-compliant products may result in a fire,
excessive heat, explosion, or leak of electrolyte.
CAUTION:
Attach a strap to the strap hole of
the battery to prevent it from falling.

Electrical safety

1. Do not handle the cord and battery with wet or
greasy hands.
2. Do not use a damaged USB cable.
3. Do not abuse the cord. Do not use the cord for
carrying, pulling or unplugging. Keep the cord
away from heat, oil, and sharp edges.
4. Do not leave any cord disconnected while the
battery power is supplied. Small children may
put the live plug in their mouth and cause injury.
Do not insert nails, wires, or other items into
5.
the USB power supply port. Doing so may cause
short circuit, which can cause smoke or a fire.
Do not connect the power source to the USB
6.
port (except for the USB power adapter for
charging). The USB port is only intended for
charging lower voltage devices. Always place
the cover over the USB port when not charging
a lower voltage device. Otherwise there is risk of
fire.
7. Recharge battery pack by recommended char-
ger by the manufacturer. A battery pack that is
suitable for one type of charger may create a risk
of fire when charged by another charger.
8. Use appliances only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
9. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
10. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
11. Do not use a battery or the appliance to be
used with the battery if they are damaged or
modified. Damaged or modified battery or appli-
ance may exhibit unpredictable behaviour result-
ing in fire, explosion or risk of injury.
3 ENGLISH