General Information; Introduction; Package Items - MUTOH ValueCut II VC2-600 User Manual

ValueCut USER MANUAL

1 General Information

1.1 Introduction

ValueCut series cutting plotters have been designed to produce computer-generated images or perform
contour cutting on sheets or rolls of vinyl media.
This manual covers the following models of ValueCut series cutting plotters:
‧VC2-600
‧VC2-1300
‧VC2-1800

1.2 Package Items

The package of the ValueCut model contents the items listed below, please check carefully.
If you find any item missing, please consult your local dealer for further assistance.
S t a n d a r d I t e m
S t a n d a r d I t e m
1. Cutting Plotter Main unit
2. Stand Set (for VC2-1300/1800 only) (Optional for VC2-600)

2 piece of base beam

2 piece of side beam

1 piece of stand beam

20 pieces of M6 screws

1 piece of 4 mm L-shape hexagon screw driver

1 piece of Installation Guide for Stand Set
VC2E-A-00
for media width: 50 mm (1.97") ~ 770 mm (30.3")
for media width: 50 mm (1.97") ~ 1,594 mm (62.7")
for media width: 300 mm (11.8") ~ 1,990 mm (78.3")
9
General Information
Q u a n t i t y
Q u a n t i t y
1
1