Table of Contents
Advertisement
Introduction
1
Introduction
Name of each part
Printer's main body (Front side)
Maintenance cover L
Open and close this cover when
cleaning or replacing consumables.
It is normally closed.
Media guide
This is a passage for the
media.
Stand
Adjuster
Carriage
Contains the print
head, the LED pointer
and UV-LED unit.
Pressurizing rollers
Press and hold the whole
media when printing.
Platen
Media is printed on here.
There is an adsorption
fan inside.
Front cover
Open and close this cover when
media is loaded or jammed.
It is normally closed.
Cutter
UV-LED unit
Operation panel
⇒Operation panel P. 11
Media cut groove
Used to cut media straight.
Maintenance cover R
Open and close this cover
when cleaning or replacing
consumables.
It is normally closed.
Media loading lever
Used for fixing or releasing
the media.
Lower Lever further to fix
the media firmly.
Waste fluid tank
Used for collecting waste
fluid discharged from the
printer.
Remove the waste liquid
before it becomes full.
Media holder
Located at the edge of the
media and it protects the
media from being lifted.
(located on both edges.)
Name of each part
9
Advertisement
Table of Contents
Troubleshooting
