General Information; Introduction; Package Items - MUTOH VC-600 User Manual

ValueCut USER MANUAL

1 General Information

1.1 Introduction

ValueCut series cutting plotters have been designed to produce computer-generated images or perform
contour cutting on sheets or rolls of vinyl media.
This manual covers the following models of ValueCut series cutting plotters:
‧VC-600
‧VC-1300
‧VC-1800

1.2 Package Items

The package of the ValueCut model contents the items listed below, please check carefully.
If you find any item missing, please consult your local dealer for further assistance.
S t a n d a r d I t e m
S t a n d a r d I t e m
1. Cutting Plotter Main unit
2. Stand Set ( for VC-1300/1800 only )(Optional for VC-600)

2 piece of T-shape stand

1 piece of stand beam

18 pieces of M6 screws

1 piece of M5 L-shape hexagon screw driver

1 piece of Installation Guide for Stand Set
V5a 2015 Jan
for media width: 50mm(1.97") ~ 770mm(30.3")
for media width: 50mm(1.97") ~ 1594mm(62.7")
for media width: 300mm(11.8") ~ 1900mm(74.8")
9
General Information
Q u a n t i t y
Q u a n t i t y
1
1