Frame-based Services
Set up service for either an IDSL or SDSL frame-based card using one of the following sections.
SDSL Frame Service
The following shows the configuration process for setting up SDSL frame-based service.
•
Create one or more SDSL frame line profiles. See
Profiles" on page 111
Profiles" on page 393
•
Create one or more SDSL frame alarm profiles. See
Profiles" on page 114
Profiles" on page 395
•
Provision service for the SDSL frame card. Configure the ports (includes selecting the
SDSL frame line profile and SDSL frame alarm profile for each port). See
SDSL Frame Service" on page 117
Frame Service" on page 397
•
Create the VCC through the Avidia system (from the line card to the SDSL frame-based
card). See
"Configuring PVCCs" on page 170
PVPCs" on page 433
•
Configure a session to set the service and encapsulation types for the VCC. The available
encapsulation types depend upon the service type you select and both must match the
modem encapsulation type. See
(command-line interface) or
(Web interface) for more information.
Avidia System Configuration and Management User Manual
(command-line interface) or
(Web interface).
(command-line interface) or
(Web interface).
(command-line interface) or
(Web interface).
(Web interface) for more information.
"Configuring Bridging and Routing Sessions" on page 228
"Configuring Bridging and Routing Sessions" on page 486
Chapter 3: Applications and Configuration Overview
"Configuring SDSL Frame Line
"Configuring SDSL Frame Line
"Configuring SDSL Frame Alarm
"Configuring SDSL Frame Alarm
"Configuring SDSL
(command-line interface) or
"Configuring
"Configuring
71