Table of Contents
Advertisement
Configuring SDSL Frame Line Profiles
Adding SDSL Frame Line Profiles
Fixed Rate
is the only supported
setting.
1
In the
Rate (Kbps)
The valid range supported by the SDSL card is from 64 to 2,048, in increments of 64.
However, the specified rate must be supported by the remote modem. See the remote
modem documentation to verify the supported data rates.
2
Click
Add
to add the SDSL line profile.
Deleting SDSL Frame Line Profiles
You cannot delete profiles that are assigned to ports.
1
In the
SDSL Line Profile Table
profile you want to delete.
Click
and
table.
displays the next page of the table.
2
Select the
Delete
select the
Delete
deleted), click
If you decide not to delete a selected row, clear the
Clear All
to clear the
3
Click
Delete Checked Row(s)
A confirmation dialog displays.
4
Click
OK
to delete the selected table rows, otherwise click
394
Rate Mode
box, type the transmit rate in Kbps.
window, locate the table row that contains the SDSL line
if necessary to view the entire table.
check box next to the row that contains the profile you want to delete. To
check box for all rows (except the default profile, which cannot be
.
Check All
Delete
check box for all rows.
to delete the profiles.
, therefore you do not need to select a
displays the beginning of the
Delete
check box next to the row. Click
Cancel
Avidia System Configuration and Management User Manual
Rate Mode
.
Advertisement
Table of Contents
