Configuring Bridging And Routing Sessions - ADC AVIDIA SWD4573I1 User Manual

Configuring Bridging and Routing Sessions

C
ONFIGURING
You can configure bridging and routing sessions using PVCs that terminate on the management
card (for example, PVCs between ADSL cards and the management card or PVCs between OC3
line cards and the management card). You can configure 96 bridging and routing sessions.
To configure a bridging or routing session, you configure a PVC between a line or channel card
and the management card, then set up the desired service for the session (bridging, routing or
both). The system automatically assigns the management card VPI and VCI for each session. If
you are configuring a session using an SDSL frame card, the system automatically assigns the
SDSL VPI and VCI and configures the session to use VC-MUX_Bridged encapsulation mode.
You add, modify and delete sessions from the
following to open the
•
In the Site Map Navigation
•
In the Tree Navigation
Configuration Table
486
B
RIDGING AND
Session Configuration Table
window, click
window, click Configuration Management
.
R
OUTING
Session Configuration Table
window:
Session Configuration .
,
Avidia System Configuration and Management User Manual
S
ESSIONS
window. Do one of the
Service Provisioning , Session