Table of Contents
Advertisement
Parameter
<index>
The PVPC Table row index number of the primary PVPC for which you want to switch
traffic from the backup PVPC back to the primary PVPC.
Example
::pvpc=> restore 3
Changing Cell Channel Card PVPC Admin Status
1
From the ::pvpc=> prompt, type show then press
parameters for all PVPCs.
2
Note the index number of the PVPC for which you want to change the status.
3
Type the admin command in the following format then press
admin <index> (up|down)
Parameters
<index>
The index number of the PVPC you want to activate or deactivate.
(up|down)
Type up to activate the PVPC; type down to deactivate it.
Example
::pvpc=> admin 2 up
Avidia System Configuration and Management User Manual
Chapter 8: Configuring ATM Virtual Circuits
ENTER
to display the configured
ENTER
.
167
Advertisement
Table of Contents
