The following table describes the information displayed after you type a perf command.
Information
Port
ESs (Network/Customer)
UASs (Network/Customer)
M
ONITORING
You can monitor the transmitted and received octets for each modem that is attached to an
SDSL frame port.
You view SDSL frame CPE statistics using the command-line interface from the
::interfaces=> prompt. From the ::root=> prompt, type the following command then
press
ENTER
to display the ::interfaces=> prompt.
display stats interfaces
Type cpe then press
A screen similar to the following displays.
::interfaces=> cpe
CPEPort
LAN inOctets
4.1
4.2
Avidia System Configuration and Management User Manual
Description
The port for which the performance data is displayed.
The number of errored seconds that occurred during
the specified interval. Errored seconds are seconds
during which errors occur that prevent the payload
from being corrected.
The number of unavailable seconds that occurred
during the specified interval. Unavailable seconds are
seconds during which the SDSL frame loop is not
synchronized.
SDSL F
RAME
ENTER
.
LAN outOctets
0
0
0
0
Chapter 12: Monitoring Subscriber Connections
CPE S
TATISTICS
WAN inOctets
WAN outOctets
0
292924
0
32364
267