Deleting Destination-MAC Address Filtering Table Entries
1
From the ::filter=> prompt, type show then press
sessions.
2
Note the index number of the Destination-MAC Address Filtering Table entry you want to
delete.
3
Type the delete command in the following format then press
delete <index>
Parameter
<index>
The Destination-MAC Address Filtering Table index number of the entry you want to
delete.
Example
::filter=> delete 2
C
ONFIGURING
You can configure several system-wide bridging parameters. Each parameter comes
preconfigured with a default value, however you can modify each setting.
You modify system bridging parameters from the ::bridging=> prompt. From the
::root=> prompt, type the following command then press
::bridging=> prompt.
configuration bridging
Avidia System Configuration and Management User Manual
S
B
YSTEM
RIDGING
Chapter 10: Configuring Bridging and Routing
ENTER
to display the configured
ENTER
.
P
ARAMETERS
ENTER
to display the
247