Monitoring Bridge Port Status - ADC AVIDIA SWD4573I1 User Manual

Monitoring Bridge Port Status

M
ONITORING
You can monitor the number of discarded packets on each configured logical bridge session
port.
You monitor bridge port status using the command-line interface from the ::bridge=>
prompt. From the ::root=> prompt, type the following command then press
display the ::bridge=> prompt.
display stats bridge
Type port then press
A screen similar to the following displays.
::bridge> port
BridgePort Slot
1 1
Information
BridgePort
Slot
Port
Vpi
Vci
Delay ExceededDiscards
MTU ExceededDiscards
306
B P
RIDGE ORT
ENTER .
Port Vpi Vci
1 0 1
Description
The logical bridge session port number. The system automatically
assigns this number when you configure a bridging session.
The physical slot and port number of the bridge.
The VPI and VCI of the bridge.
The number of packets that were discarded due to excessive delay in
forwarding them.
The number of packets that were discarded due to the maximum size
exceeding the maximum allowable packet size for the logical bridge
port. The maximum size is 9K for ATM ports and 1.5K for Ethernet
ports.
S
TATUS
Delay MTU
ExceededDiscards ExceededDiscards
0 0
Avidia System Configuration and Management User Manual
ENTER to