Table of Contents
Advertisement
The following table describes the information displayed after you type a perf command.
Information
Port
LOSS
LOCD
SLOCD
History_Id
Displaying SDSL Cell TC Layer Statistics
You can display ATM transmission convergence (TC) layer statistics for cell-based SDSL
circuits. Type the tclayer command in the following format and press
tclayer [slot.port]
Parameter
[slot.port]
The slot and port for which you want to display statistics (format slot.port). Omitting this
parameter displays statistics for all SDSL cell ports.
Avidia System Configuration and Management User Manual
Description
The port for which the performance data is displayed.
Loss of signal seconds are seconds during which the SDSL cell
line is incapable of transmitting or receiving data and all data is
lost.
Loss of cell delineation seconds are seconds in which some cells
transmitted during that second were lost
Severe loss of cell delineation seconds are seconds in which
most of the cells transmitted during that second are lost.
If you do not include the
line, <number> is the number of the 15-minute data collection
interval for which the performance data is displayed (valid
numbers are 1 to 96). If you include the
the command line, <number> is the number of the day for
which the performance data is displayed (valid numbers are 1 to
7). To display performance data for all intervals in the past 24
hours, type
.
-id all
Chapter 12: Monitoring Subscriber Connections
.
parameter in the command
-week
-week
ENTER
parameter in
.
271
Advertisement
Table of Contents
