Table of Contents
Advertisement
Configuring IDSL Alarm Profiles
4
In the
Daily SES
to disable this trap. The range is 0 to 2047, with 25 as the default.
The Daily SES Threshold is the number of severely errored seconds that must be met or
exceeded on the IDSL line within a day for an alarm to display. A severely errored second
generates when the number of block errors (CRC violations) defined by the SES threshold
parameter (see
second interval.
5
Click
Add
to add the IDSL alarm profile.
Deleting IDSL Alarm Profiles
You cannot delete profiles that are assigned to ports.
1
In the
IDSL Alarm Configuration Profile Table
IDSL alarm configuration profile you want to delete.
Click
and
table.
displays the next page of the table.
2
Select the
Delete
select the
Delete
deleted), click
If you decide not to delete a selected row, clear the
Clear All
to clear the
3
Click
Delete Checked Row(s)
A confirmation dialog displays.
4
Do one of the following:
•
Click
OK
•
Click
Cancel
410
box, type the desired severely errored second threshold in seconds, or type
"Adding ADSL Line Profiles" on page
if necessary to view the entire table.
check box next to the row that contains the profile you want to delete. To
check box for all rows (except the default profile, which cannot be
Check All
.
Delete
check box for all rows.
to delete the profiles.
to delete the selected table rows.
to not delete the table rows.
387) are detected during a one
window, locate the table row that contains the
displays the beginning of the
Delete
check box next to the row. Click
Avidia System Configuration and Management User Manual
0
Advertisement
Table of Contents
