Table of Contents
Advertisement
Configuring ATM Policing
C
ONFIGURING
Policing, or UPC, enables you to specify whether traffic must conform to the configured traffic
contract. When policing is enabled, traffic that does not conform to the contract is deleted. You
can enable or disable policing by ATM port.
ATM Port Policing
You enable or disable policing (UPC) for ATM ports from the ::port=> prompt. From the
::root=> prompt, type the following command then press
prompt:
configuration atm upc port
Configuring ATM Port Policing
1
From the ::port=> prompt type show to display the UPC Table.
2
Note the index number of the UPC Table entry for which you want to configure policing.
3
From the ::port=> prompt type the modify command as follows, then press
modify <index> <enable|disable>
Parameters
<index>
The index number of the UPC Table entry you want to configure.
<enable|disable>
The administrative status of policing on the selected port.
Example
::port=> modify 4 enable
200
ATM P
OLICING
ENTER
Avidia System Configuration and Management User Manual
to display the ::port=>
ENTER
.
Advertisement
Table of Contents
