Displaying Atm Routing Table Entries - ADC AVIDIA SWD4573I1 User Manual

<slot.port>
The line card slot and port to which you want to route the traffic when the current line card
fails.
[-admin (active|inactive)]
The administrative status of the routing table entry. Type -admin active to activate it
or type -admin inactive to deactivate it.
Example
::route=> new 39:26:34:34:75:85:11:08 5 12.1 -admin active

Displaying ATM Routing Table Entries

From the ::route=> prompt, type the show command in the following format, then press
ENTER .
show [<slot.port>]
Parameter
[<slot.port>]
(Optional) The slot and port for which you want to display ATM routing information.
Omitting this parameter displays the entire ATM Routing Table.
Avidia System Configuration and Management User Manual
Chapter 8: Configuring ATM Virtual Circuits
197