Configuring SDSL Cell Service
C
ONFIGURING
You configure SDSL service for each port by specifying a line profile and an alarm profile. Each
SDSL cell port is assigned a default configuration. The default profile index for each SDSL cell
profile type is 1. This procedure describes how to modify the configuration to reflect the desired
service. Each SDSL cell port is assigned a default configuration. This procedure describes how
to modify the configuration to reflect the desired service.
1
Do one of the following:
•
In the
Site Map Navigation
•
In the
Tree Navigation
Configuration
The
Port Configuration - Slot/Port Selection
2
Select the slot that contains the port you want to configure, then click
The
SDSL Cell Port Configuration
right corner of the window, along with the description of the installed card.
404
SDSL C
ELL
window, click
window, click
.
window displays. The selected slot displays in the upper
S
ERVICE
Port Configuration
Configuration Management
window displays.
Avidia System Configuration and Management User Manual
.
,
Service Provisioning
OK
.
,
Port