Table of Contents
Advertisement
Configuring Global IP Routing Settings
Modifying System STP Parameters
In the
System Bridging Configuration
1
In the
Priority
The valid range is 0 to 65535. The value 0 indicates the highest priority. The default value
is 32768.
2
In the
Max Age
will be deleted if they are not re-learned. The valid range is 6 to 40. The default value is 20.
3
In the
Hello Time
Spanning Tree Protocol packets. The valid range is 1 to 10. The default value is 2.
4
In the
Forward Delay
changing the state of a particular interface (e.g., to blocked). The valid range is 4 to 30. The
default value is 15.
This delay prevents the interface states from changing so rapidly that the STP cannot keep
up with the current topology of the network and cannot therefore manage bridging
efficiently.
5
Do one of the following:
•
To activate the settings and close the
•
To cancel the settings and close the
C
ONFIGURING
You configure global settings to enable IP routing and specify the time-to-live value for IP
datagrams.
You configure global IP routing settings from the
following to open the
•
In the
Site Map Navigation
•
In the
Tree Navigation
Settings
.
502
window:
box, type the priority of the system (the entire chassis) within the network.
box, type the number of seconds after which entries in the Bridging Table
box, type the interval, in seconds, at which you want the system to send
box, type the number of seconds you want the system to wait before
G
LOBAL
System Settings
window.
window, click
window, click
System Bridging Configuration
System Bridging Configuration
IP R
OUTING
System Settings
System Settings
.
Configuration Management
Avidia System Configuration and Management User Manual
window, click
window, click
S
ETTINGS
window. Do one of the
,
System Setup
,
System
Set
.
Close
.
Advertisement
Table of Contents
