Configuring SDSL Cell Line Profiles
Adding SDSL Cell Line Profiles
You add SDSL cell line profiles from the
1
In the
Code
box, select the line coding.
The line code sets the line coding for the port. Currently,
coding.
2B1Q
transmission rates, plus signaling over two copper pairs.
2
In the
Rate Mode
The rate mode defines the form of transmit rate adaptation. Currently
supported rate mode.
maximum transmit rate
3
In the
Rate
box, enter the desired transmit rate, in kbps.
The valid range supported by the SDSL cell card is from 64 to 2,048, in increments of 64.
However, the specified rate must be supported by the remote modem. See the remote
modem documentation to verify the supported data rates.
4
Click
to add the SDSL cell line profile.
Add
400
SDSL cell technology provides the equivalent of 1.544 Mbps digital
box, select the desired rate mode.
Fixed Rate
means the loop must be able to come up at the specified
(Step
3), or it does not come up at all.
SDSL Cell Line Profile Table
2B1Q
Avidia System Configuration and Management User Manual
window.
is the only supported line
Fixed Rate
is the only