Deleting Sdsl Cell Line Profiles; Configuring Sdsl Cell Alarm Profiles - ADC AVIDIA SWD4573I1 User Manual

System configuration and management
Table of Contents

Advertisement

Deleting SDSL Cell Line Profiles

You cannot delete profiles that are assigned to ports.
1
From the ::line=> prompt, type show then press
profile table.
2
Note the index number of the SDSL cell line profile you want to delete.
3
Type the delete command in the following format then press
delete <index>
Parameter
<index>
The index number of the SDSL cell line profile you want to delete.
Example
::line=> delete 2
C
ONFIGURING
SDSL cell alarm profiles determine the conditions that generate SNMP traps. When the
configured thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap
receiver(s). Only one trap is sent for each 15-minute data collection period. SDSL cell port
configuration requires assigning an alarm profile, therefore you must configure the desired
alarm profile prior to configuring the SDSL cell port. A default profile exists with an index of 1.
You cannot delete the default profile. Setting the threshold value to zero disables the trap.
You configure SDSL cell alarm profiles from the ::alarm=> prompt. From the ::root=>
prompt, type the following command then press
configuration sdsl cell profile alarm
Avidia System Configuration and Management User Manual
SDSL C
ELL
Chapter 6: Configuring Subscriber Services
ENTER
to display the SDSL cell line
ENTER
A
P
LARM
ROFILES
ENTER
to display the ::alarm=> prompt.
.
121

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avidia switchware version 2.0

Table of Contents

Save PDF