Table of Contents
Advertisement
Rebooting Cards
A screen similar to the following displays.
::frame=>
SDSL Modem (CPE)
Port
4.1
4.2
4.3
4.4
4.5
Information
Port
VerNo
R
EBOOTING
You can reboot an individual card, or the entire Avidia system, two different ways:
•
Perform a cold boot by recycling power to the system. This reinitializes the card memory,
including resetting the system log. If you do not want to lose the data stored in the system
log, do not perform a cold boot.
•
Perform a warm boot as described in the following sections. The data stored in the system
log is retained.
You can reboot cards from the ::admin=> prompt. From the ::root=> prompt, type
admin then press
Rebooting the System
1
To reboot the entire system, from the ::admin=> prompt type the reboot command in the
following format then press
reboot [-y]
The system displays:
Reboot System?
2
Type
Y
to reboot the system, or type
366
Version
0
24
0
0
24
Description
The SDSL frame port to which the modem is attached.
The SDSL frame modem software version number.
C
ARDS
ENTER
to display the ::admin=> prompt.
ENTER
.
N
to cancel this procedure.
Avidia System Configuration and Management User Manual
Advertisement
Table of Contents
