Adding Atm Traffic Profiles - ADC AVIDIA SWD4573I1 User Manual

Adding ATM Traffic Profiles

ATM traffic profiles are stored in the
profile has an index number assigned to it. You use the index number to assign a profile to an
ATM connection.
1 In the Traffic Type
The text boxes to the right display the default parameter values for the selected traffic type.
2 Type the desired information in the text boxes as follows:
Parameter Description
PCR0+1 The desired peak cell rate to apply to
both tagged and non-tagged cells, in
cells per second.
SCR0+1 The sustainable cell rate, or minimum
guaranteed transmission rate, to be
applied to all cells, in cells per second.
MBS0+1 The maximum burst size, or maximum
number of cells that can be transmitted
at the peak rate, in cells.
CDVT The maximum allowable Cell Delay
Variation Tolerance, or delay between
consecutive ATM cells, in cells per
second.
MaxCTD The Maximum Cell Transfer Delay, or
elapsed time between the transmission
of a cell and the receipt of that cell at its
destination, in microseconds.
CLR The maximum Cell Loss Ratio, or
number of lost cells divided by the total
number of transmitted cells.
3 To activate the profile, click Add. The new profile is assigned an index number and is
displayed in the
Avidia System Configuration and Management User Manual
ATM Traffic Descriptor Configuration Table
box, select the desired traffic descriptor type (
ATM Traffic Descriptor Table
Chapter 22: Configuring ATM Virtual Circuits
UBR
Valid Range Applies to Traffic Types...
150-353,207 UBR, CBR, rt-VBR, nrt-VBR
150-353,207 rt-VBR, nrt-VBR
1-65,536 rt-VBR, nrt-VBR
150-080,000 UBR, CBR, rt-VBR, nrt-VBR
20-1,000 CBR, rt-VBR, nrt-VBR
5-12 CBR, rt-VBR, nrt-VBR
.
window. Each
, CBR , rt-VBR or nrt-VBR
429
).