Deleting Ip Routing Table Entries; Modifying Rip Configuration - ADC AVIDIA SWD4573I1 User Manual

Deleting IP Routing Table Entries

1 Locate the table row that contains the IP routing entry you want to delete.
Click and
table. displays the next page of the table.
2 Click the Delete
3 Click the Delete Checked Row(s)
A confirmation dialog displays.
4 Do one of the following:
• Click OK
•
Click Cancel
M
ODIFYING
The RIP Configuration Table displays information about the Routing Information Protocol
(RIP) used for each routing session. You configure RIP information initially during session
configuration, however you can modify it using the following procedures.
You modify RIP information from the
to open the RIP Configuration Table
• In the
Site Map Navigation
•
In the Tree Navigation
Configuration .
Avidia System Configuration and Management User Manual
if necessary to view the entire table.
checkbox next to the row that contains the information you want to delete
button.
to delete the selected table entry and return to the
to return to the IP Routing Table
RIP C
ONFIGURATION
RIP Configuration Table
window:
window, click
window, click
Chapter 24: Configuring Bridging and Routing
window without deleting the table entry.
window. Do one of the following
.
RIP Configuration
Configuration Management
displays the beginning of the
IP Routing Table window.
, Bridge/Route , RIP
497