Configuring IDSL Alarm Profiles
Deleting IDSL Line Profiles
You cannot delete profiles that are assigned to ports. You cannot delete the
default profile.
1
In the
IDSL Line Configuration Profile Table
IDSL line configuration profile you want to delete.
Click
and
table.
displays the next page of the table.
2
Select the
Delete
select the
Delete
deleted), click
If you decide not to delete a selected row, clear the
to clear the
Clear All
3
Click
Delete Checked Row(s)
A confirmation dialog displays.
4
Do one of the following:
•
Click
OK
•
Click
Cancel
C
ONFIGURING
IDSL alarm profiles determine the conditions that generate SNMP traps. When the configured
thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap receiver(s).
You assign alarm profiles to IDSL ports during port configuration. A default profile exists with
an index of 1. You cannot delete the default profile.
To configure an IDSL alarm profile:
1
Access the
IDSL Port Configuration
2
Click the
Alarm Profile Browse
408
if necessary to view the entire table.
check box next to the row that contains the profile you want to delete. To
check box for all rows (except the default profile, which cannot be
Check All
.
check box for all rows.
Delete
to delete the profiles.
to delete the selected table rows.
to not delete the table rows.
IDSL A
LARM
window (see
button.
window, locate the table row that contains the
displays the beginning of the
Delete
check box next to the row. Click
P
ROFILES
"Configuring IDSL Service" on page
Avidia System Configuration and Management User Manual
411).