Configuring Trap Receivers
Displaying Trap Receivers
To verify your trap receiver configuration, from the ::trap=> prompt, type show then press
ENTER
. A screen similar to the following displays.
::trap=> show
Index
Network Address
1
90.0.0.5
2
90.0.0.6
Deleting Trap Receivers
1
From the ::trap=> prompt, type show then press
receivers.
2
Note the index number of the trap receiver you want to delete.
3
Type the delete command in the following format then press
delete <index>
Parameter
<index>
The trap receiver table index number of the trap receiver you want to delete.
Example
::trap=> delete 2
96
Subnet Mask
Community
255.255.255.0
public
255.255.255.0
private
Avidia System Configuration and Management User Manual
Version
SNMPv1
SNMPv2c
ENTER
to display the configured trap
ENTER
.