Table of Contents
Advertisement
Deleting IDSL Alarm Profiles
You cannot delete profiles that are assigned to ports. You cannot delete the
default profile.
1
From the ::alarm=> prompt, type show then press
IDSL alarm profiles.
2
Note the index number of the profile you want to delete.
3
Type the delete command in the following format then press
delete <index>
Parameter
<index>
The index number of the alarm profile you want to delete.
Example
::alarm=> delete 3
C
ONFIGURING
You assign IDSL service for the card by specifying the transmit clock source and for each port
by specifying a line profile and alarm profile. Before configuring an IDSL port, make sure you
have:
Set up the desired IDSL line profile (see
for instructions).
Set up the desired IDSL alarm profile
page 130
for instructions).
Avidia System Configuration and Management User Manual
IDSL S
ERVICE
(see"Configuring IDSL Alarm Profiles" on
Chapter 6: Configuring Subscriber Services
ENTER
ENTER
"Configuring IDSL Line Profiles" on page 127
to display the configured
.
133
Advertisement
Table of Contents
