Displaying System Information; Configuring Ip Addresses - ADC AVIDIA SWD4573I1 User Manual

Displaying System Information

You can display the current system information to verify your configuration. From the
::system=> prompt, type show then press
displays.
::system=> show
System Name:
System Contact:
System Location:
System Description:
System Up Time (d:h:m:s)
AMC Card Ethernet Port MAC Address:
Agent Trap:
Agent Authentication Trap:
Boot Server IP Address:
Boot File:
Boot Mode:
System Time/Date:
C
ONFIGURING
You set the system IP address, subnet mask and default gateway (router) to enable
communication with external networks and to enable access to the Web interface. The default
management card IP address is 192.168.0.1.
You can configure the default gateway when you set the system IP address and subnet mask, or
as a separate procedure.
You configure IP addresses from the ::ip=> prompt. From the ::root=> prompt, type the
following command then press
configuration ip
Avidia System Configuration and Management User Manual
System #100
John Smith
Building A
Avidia
2:3:20:55
00 20 a7 10 00 52
disable
enable
10.0.0.121
amc.bin
nvram
Fri, Jun 11 2000 10:47:00
IP A
DDRESSES
ENTER
to display the ::ip=> prompt.
Chapter 5: Configuring System Parameters
ENTER
. A screen similar to the following
91