Monitoring Interfaces - ADC AVIDIA SWD4573I1 User Manual

The following table describes the interface information that displays when you type a port
command.
Information
Port
Speed
Admin Status
Oper Status
In Octets
Out Octets
In Errors
M
ONITORING
From the ::interfaces=> prompt, type the port command in the following format, then
press ENTER .
port [<portnum>]
Parameter
[<portnum>]
The specific port for which you want to display interface statistics (format slot.port).
Omitting this parameter displays statistics for all interfaces.
Avidia System Configuration and Management User Manual
Description
The port number of the interface.
An estimate of the interface current bandwidth in bits per second.
The configured state of the interface. Options:
• up — The interface is activated.
• down — The interface is deactivated.
The current operational state of the interface. Options:
• up — The interface is operational and ready to receive packets.
• down — The interface is not operational.
The total number of octets received on the interface, including
framing characters.
The number of octets transmitted out of the interface, including
framing characters.
The number of inbound packets that contained errors preventing
them from being delivered to a higher-layer protocol.
I
NTERFACES
Chapter 15: Monitoring Physical Interfaces
325