Adding Sdsl Cell Port Configurations - ADC AVIDIA SWD4573I1 User Manual

Adding SDSL Cell Port Configurations

Each SDSL cell port is automatically assigned a default configuration. The default profile index
number for each SDSL cell profile type is 1. This procedure describes how to modify the
configuration to reflect the desired service.
1 From the ::cell=> prompt, type the following command then press
the ::line=> prompt.
profile line
2 Type show then press
3 Note the index number of the line profile you want to assign to the channel.
4 Type the following command then press
configuration sdsl cell profile alarm
5 Type show then press
6 Note the index number of the alarm profile you want to assign to the channel.
7 Type the following command then press
configuration sdsl cell
8 Type the set command in the following format then press
set <port> <lpindex> <apindex> (up|down)
[-scramble (enable|disable)]
Parameters
<port>
The channel slot and port number (format slot.port).
<lpindex>
The index number of the line profile you want to assign to this channel.
<apindex>
The index number of the alarm profile you want to assign to this channel.
(up|down)
The administrative status of the line: Up activates the port. Down deactivates the port.
Avidia System Configuration and Management User Manual
ENTER
to display the configured line profiles.
ENTER
ENTER
to display the configured alarm profiles.
ENTER
Chapter 6: Configuring Subscriber Services
to display the ::alarm=> prompt.
to display the ::cell=> prompt.
ENTER .
ENTER
to display
125