Table of Contents
Advertisement
Configuring ATM Traffic Profiles
<CLR>
The maximum Cell Loss Ratio, or number of lost cells divided by the total number of
transmitted cells. This value is represented as 10
this parameter. The valid range is 5 - 12.
<SCR01>
The desired sustained cell rate (minimum guaranteed transmission rate), in cells per
second, to be applied to all cells regardless of the CLP tagging. The valid range is
150-353,206.
<MBS>
The Maximum Cell Transfer Delay, or elapsed time between the transmission of a cell
and the receipt of that cell at its destination, in microseconds. The valid range is
1-65536
Examples
::traffic=> new 5 ubr
::traffic=> new 6 ubr 5000
Displaying ATM Traffic Profiles
From the ::traffic=> prompt, type the show command in the following format then press
ENTER
.
show [<index>]
Parameter
[<index>]
The index number of the ATM traffic profile you want to display. Omitting this parameter
displays the entire ATM Traffic Descriptor Table.
156
-n
, where n is the required input for
Avidia System Configuration and Management User Manual
Advertisement
Table of Contents
