Configuring Sdsl Frame Line Profiles - ADC AVIDIA SWD4573I1 User Manual

Examples
::adsl=> show 4.1
::adsl=> show
The following screen illustrates an example of both show adsl commands. In addition to
displaying the configured parameters, it also displays the line coding and line type.
::adsl=> show
Port Coding Type
4.1 DMT Physical/Interleave
4.2 DMT Physical/Interleave
4.3 DMT Physical/Interleave
::adsl=> show 4.1
Port Coding Type
4.1 DMT Physical/Interleave
C
ONFIGURING
SDSL frame line profiles contain a preconfigured set of parameters, including the rate
adaptation mode and the transmit rate. SDSL frame port configuration requires you to apply an
SDSL frame line profile to the line. Therefore you must configure the desired SDSL frame line
profile before configuring the SDSL frame port. A default profile exists with an index of 1. You
cannot delete the default profile.
You configure SDSL frame line profiles from the ::line=> prompt. From the ::root=>
prompt, type the following command then press
configuration sdsl frame profile line
Avidia System Configuration and Management User Manual
Line
Profile Profile Status
1
3
8
Line
Profile Profile Status
1
SDSL F
RAME
Chapter 6: Configuring Subscriber Services
Alarm Admin
1 up
7 down
2 up
Alarm Admin
1 up
L P
INE ROFILES
ENTER
to display the ::line=> prompt.
111