Displaying Cell Channel Card PVPC Information
From the ::pvpc=> prompt, type the show command in the following format then press
ENTER
.
show [<port> [<vpi>]]
Parameters
[<port>]
The port number for which you want to display the configured PVPC (format slot.port).
Omitting this parameter displays all configured PVPCs.
[<vpi>]
The VPI associated with the specified port. Omit this parameter if you did not specify a
port. If you did specify a port, but omit this parameter, all of the PVPCs configured on that
port display.
Example
::pvpc=> show 11.1 9
A screen similar to the following displays.
::pvpc=>show 11.1 9
Source
Index Port
VPI
2
3.1
9
Avidia System Configuration and Management User Manual
Destination
TxTraffic
Port
VPI
Index
11.1
9
1
Chapter 8: Configuring ATM Virtual Circuits
RxTraffic
Index
Admin
Oper
2
up
up
169