Table of Contents
Advertisement
Displaying the UPC Table
To verify the policing configuration for each port, from the ::port=> prompt, type show then
ENTER
press
. A screen similar to the following displays.
::port=> show
Index
Port
1
1.1
2
3.1
3
3.2
4
3.3
5
3.4
PVC Policing
Policing, or UPC, enables you to specify whether traffic must conform to the configured traffic
contract. When policing is enabled, traffic that does not conform to the contract is deleted. You
can enable or disable policing by PVCC.
You enable or disable policing (UPC) by ATM port from the ::vcl=> prompt. From the
::root=> prompt, type the following command then press
prompt:
configuration atm upc vcl
Configuring PVCC Policing
1
From the ::port=> prompt type show to display the PVCC Table.
2
Note the index number of the PVCC Table entry for which you want to configure policing.
3
From the ::vcl=> prompt type the modify command as follows, then press
modify <index> <enable|disable>
Avidia System Configuration and Management User Manual
UPC
Status
enable
disable
enable
enable
enable
Chapter 8: Configuring ATM Virtual Circuits
ENTER
to display the ::vcl=>
ENTER
.
201
Advertisement
Table of Contents
