Monitoring System Hardware Status - ADC AVIDIA SWD4573I1 User Manual

M
ONITORING
You monitor system status information, such as fuse and power alarms, and whether a critical,
major or minor alarm condition exists. From the ::root=> prompt, type the following
command then press
display hardware system
A screen similar to the following displays.
::hardware=> system
Power Fan CRT MAJ MIN AUD FAN1 FAN2 FAN3 FAN4 PWR_MIN IP1
OK OK OFF OFF OFF ON
Port Card Description
1 Avidia Management Card
The following table describes the system status information that displays when you type the
display hardware system command.
Information
Power
Fan
CRT
MAJ
Avidia System Configuration and Management User Manual
S H
YSTEM ARDWARE
ENTER .
OFF OFF OFF
Most_Serious_Alarm
PSFailureAlarm
Description
Chassis power supply status. Options:
• Unknown —
• Failure — One or both power supplies has failed.
• OK — Both power supplies are operational.
Chassis fan status. Options:
—
• Unknown
• Failure — One of the fans has failed.
• OK — All fans are operational.
• Hightemp —
required for operation.
Chassis critical alarm LED status. Indicates whether a critical alarm
condition exists. Displays either OFF or ON.
Chassis major alarm LED status. Indicates whether a major alarm
condition exists. Displays either OFF or ON.
Chapter 16: Monitoring System Alarms and Status
S
TATUS
IP2
OFF ON OFF OFF
Severity
Critical
Unknown power supply status.
Unknown fan status or no fans exist.
The chassis temperature is higher than the range
FU1 FU2
OFF OFF
339