Table of Contents
Advertisement
C
ONFIGURING
SDSL alarm profiles determine the conditions that generate SNMP traps. When the configured
thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap receiver(s).
Only one trap is sent for each 15-minute data collection period. You assign SDSL alarm profiles
to ports during port configuration. A default profile exists with an index of 1. You cannot delete
the default profile.
To configure an SDSL alarm profile:
1
Open the
SDSL Port Configuration
page
397).
2
Click the
Alarm Profile Browse
The
SDSL Alarm Profile Table
and
if necessary to view the entire table.
displays the next page of the table.
Adding SDSL Frame Alarm Profiles
1
In the
Alarm Setting LOSW
enable
).
A Loss of Sync Word alarm occurs when one of the SDSL loops is out of sync.
2
In the
Alarm Setting Margin
3
In the
Alarm Setting ES
Avidia System Configuration and Management User Manual
SDSL F
RAME
window (see
button.
window displays the configured SDSL alarm profiles. Click
box, select the desired Loss of Sync Word alarm setting (
box, select the desired margin alarm setting (
box, select the desired errored seconds alarm setting (
Chapter 20: Configuring Subscriber Services
A
P
LARM
ROFILES
"Configuring SDSL Frame Service" on
displays the beginning of the table.
disable
,
disable
,
enable
).
disable
,
enable
).
395
Advertisement
Table of Contents
