Configuring System Bridging and STP Parameters
7
In the
Password
Password
box, re-type the text string.
The text string can be any length and can use any keyboard character.
8
Do one of the following:
•
To activate the settings and close the
in the confirmation dialog click
•
To cancel the settings and close the
C
ONFIGURING
P
ARAMETERS
You can configure several system-wide bridging and Spanning-Tree Protocol (STP)
parameters. Each parameter comes preconfigured with a default value, however you can modify
each setting.
You modify system bridging and STP parameters from the
window. To one of the following to open the
•
In the
Site Map Navigation
•
In the
Tree Navigation
Configuration
.
500
box, type the text string you want to use for a password, then in the
Back
S
B
YSTEM
window, click
window, click
Configuration Management
Modify RIP Configuration
.
Modify RIP Configuration
RIDGING AND
System Bridging Configuration
System Bridging Configuration
System Bridging Configuration
Avidia System Configuration and Management User Manual
window, click
Set
window, click
Cancel
STP
window:
.
,
Bridge/Route
,
System Bridging
Confirm
, then
.