C
ONFIGURING
This chapter describes how to configure subtended systems from the command-line interface.
Section
Adding a Subtended System
Modifying a Subtended System Configuration
Displaying Subtending Information
You configure which systems are subtended and subtending from the ::subtend=> prompt.
From the ::root=> prompt, type the following command then press
::subtend=> prompt.
configuration subtend
This chapter describes how to configure an Avidia 2200 system for
subtending. To configure other Avidia systems, see
Systems" on page
Avidia System Configuration and Management User Manual
S
UBTENDED
S
YSTEMS
45.
11
Page
254
255
257
ENTER
to display the
"Subtending Multiple
253