ADC AVIDIA SWD4573I1 User Manual page 338

Monitoring System IP Statistics
Information
Datagrams Received
Errored Header
Errored IP Addresses
Datagrams Forwarded
Unknown Protocol
Input Datagrams
Discarded
Datagrams Delivered
Datagrams Transmitted
Output Datagram
Discards
Output Datagram
Discards (No Route)
Reassembly Timeout
Fragments Needed
Reassembly
Datagrams Reassembled
Datagram Reassembly
Failures
Datagrams Fragmented
Datagram Fragmentation
Failures
Datagram Fragments
Generated
312
Description
The number of IP datagrams received by the system.
The number of IP datagrams received by the system that contained
errored headers.
The number of IP datagrams received by the system that contained an
error in the destination IP address.
The number of IP datagrams forwarded by the system.
The number of IP datagrams received by the system that used a
protocol the system does not recognize or support.
The number of received IP datagrams discarded by the system.
The number of IP datagrams successfully delivered to the system.
The number of datagrams generated by the router (e.g., a ping
request).
The number of transmitted IP datagrams discarded by the system.
The number of packets for which the system did not have an entry in
the Routing Table and which were routed using the default route.
The maximum number of seconds that fragments are held for
reassembly. This value is always 60.
The number of fragments that have needed reassembly.
The number of IP datagrams reassembled successfully.
The number of IP datagrams that were unable to be reassembled.
The number of IP datagrams that were fragmented successfully.
The number of IP datagrams that were unable to be fragmented
successfully.
The number of IP datagram fragments produced by the system.
Avidia System Configuration and Management User Manual