Table of Contents
Advertisement
C
ONFIGURING
Before configuring an ADSL port, make sure you have:
Set up the desired ADSL line profile (see
instructions).
Set up the desired ADSL alarm profile (see
for instructions).
You configure ADSL channels from the ::adsl=> prompt. From the ::root=> prompt,
type the following command then press
configuration adsl
Adding ADSL Port Configurations
Each ADSL port is automatically assigned a default configuration. The default profile index
number for each adsl profile type is 1. This procedure describes how to modify the configuration
to reflect the desired service.
1
From the ::adsl=> prompt, type the following command then press
the ::line=> prompt.
profile line
2
Type show then press
3
Note the index number of the line profile you want to assign to the channel.
4
Type the following command then press
configuration adsl profile alarm
5
Type show then press
6
Note the index number of the alarm profile you want to assign to the channel.
7
Type the following command then press
configuration adsl
8
Type the set command in the following format then press
set <port> <lpindex> <apindex> (up|down)
Avidia System Configuration and Management User Manual
ADSL S
ERVICE
ENTER
ENTER
to display the configured line profiles.
ENTER
to display the configured alarm profiles.
Chapter 6: Configuring Subscriber Services
"Adding ADSL Line Profiles" on page 100
"Adding ADSL Alarm Profiles" on page 104
to display the ::adsl=> prompt.
ENTER
to display the ::alarm=> prompt.
ENTER
to display the ::adsl=> prompt.
ENTER
for
ENTER
to display
.
109
Advertisement
Table of Contents
