Table of Contents
Advertisement
Configuring ADSL Alarm Profiles
Deleting ADSL Line Profiles
You cannot delete profiles that are assigned to ports. You cannot delete the
default profile.
1
In the
ADSL Line Profile Table
configuration profile you want to delete.
Click
and
table.
displays the next page of the table.
2
Select the
Delete
select the
Delete
deleted), click
If you decide not to delete a selected row, clear the
to clear the
Clear All
3
Click
Delete Checked Row(s)
A confirmation dialog displays.
4
Click
OK
to delete the selected table rows, otherwise click
C
ONFIGURING
ADSL alarm profiles determine the conditions that generate SNMP traps. When the configured
thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap receiver(s).
Only one trap is sent for each 15-minute data collection period. You assign alarm profiles to
ADSL ports during port configuration. A default profile exists with an index of 1. You cannot
delete the default profile.
To configure an ADSL alarm profile:
1
Open the
ADSL Port Configuration
2
Click the
Alarm Profile Browse
388
window, locate the table row that contains the ADSL line
if necessary to view the entire table.
check box next to the row that contains the profile you want to delete. To
check box for all rows (except the default profile, which cannot be
Check All
.
check box for all rows.
Delete
to delete the profiles.
ADSL A
LARM
window (see
button.
displays the beginning of the
Delete
check box next to the row. Click
Cancel
P
ROFILES
"Configuring ADSL Service" on page
Avidia System Configuration and Management User Manual
.
391).
Advertisement
Table of Contents
