Pvp Policing - ADC AVIDIA SWD4573I1 User Manual

Configuring ATM Policing
Parameters
<index>
The index number of the PVCC Table entry you want to configure.
<enable|disable>
The administrative status of policing on the selected port.
Example
::vcl=> modify 4 enable
Displaying the PVCC Policing Table
To verify the policing configuration for each PVCC, from the ::vcl=> prompt, type show
then press ENTER
::vcl=> show
Index Port
1 1.1
2 2.1

PVP Policing

Policing, or UPC, enables you to specify whether traffic must conform to the configured traffic
contract. When policing is enabled, traffic that does not conform to the contract is deleted. You
can enable or disable policing by PVPC.
You enable or disable policing (UPC) by PVPC from the ::vpl=> prompt. From the
::root=> prompt, type the following command then press
prompt:
configuration atm upc vpl
202
. A screen similar to the following displays.
VPI VCI
0 1024
0 115
UPC
Status
enable
disable
ENTER
Avidia System Configuration and Management User Manual
to display the ::vpl=>