Monitoring Lmi Statistics - ADC AVIDIA SWD4573I1 User Manual

Monitoring Frame Relay Performance Statistics
•
The total number of sent frames aborted.
•
The type of error last seen on this interface.
•
The number of times the link went down since it was initialized.

Monitoring LMI Statistics

You access frame relay Link Management Interface (LMI) statistics from the ::lmi=>
prompt. From the ::frame-relay=> prompt, type lmi then press
::lmi=> prompt.
From the ::lmi=> prompt, type the following command then press
statistics.
show <fslot.port>
Parameters
<fslot.port>
The frame card slot and port.
Example
::lmi=> show 5.1
A screen similar to the following displays.
::lmi=> show 5.1
Link statistics for Frame Relay port 5.1:
Number of LMI status enquiries received
Number of LMI full status enquiries received
Number of LMI status responses sent
Number of LMI full status responses sent
Number of LMI updates received
Number of LMI updates sent
Number of unknown LMI messages received
Number of lost LMI sequences
Number of missing LMI responses
Receive sequence number of last LMI frame rcvd
Receive sequence number of last LMI frame sent
Send sequence number of last LMI frame rcvd
Send sequence number of last LMI frame sent
Number of LMI Messages without Report type rcvd
Number of LMI Message without keepalive info rcvd 0
Number of LMI Messages with unsupported IE rcvd
Number of missing LMI status enquiries
298
25288
4216
4216
0
0
0
0
0
0
0
213
213
0
0
0
0
Avidia System Configuration and Management User Manual
ENTER
to display the
ENTER to display the LMI