Configuring Spvcs - ADC AVIDIA SWD4573I1 User Manual

Configuring SPVCs

C
ONFIGURING
SPVCs (Soft Permanent Virtual Circuits) provide a PVC between the CPE and the line card, and
an SVC (Switched Virtual Circuit) between the line card and the destination ATM end system.
SVCs are virtual connections that are established through an ATM network using signaling (the
end-points are defined when the call is initiated and terminated at the end of the call). SPVCs,
then, enable ATM connection redundancy between the line card and the ATM end system.
You configure SPVCs from the
SPVC Configuration
•
In the Site Map Navigation
• In the
Tree Navigation
454
SPVC
S
SPVC Configuration
window:
window, click
window, click
window. Do one of the following to open the
SPVC Configuration
Configuration Management
Avidia System Configuration and Management User Manual
.
,
ATM, SPVC Configuration
.