Configuring Destination-Mac Address Filtering (Forwarding); Adding Destination-Mac Address Filtering Table Entries - ADC AVIDIA SWD4573I1 User Manual

C
ONFIGURING
F (F
ILTERING
The Destination-MAC Address Filtering Table displays a list of ports from which frames may
be received and the corresponding ports to which those frames are allowed to be forwarded.
You add Destination-MAC Address Filtering Table entries from the ::filter=> prompt.
From the ::root=> prompt, type the following command then press
::filter=> prompt:
configuration bridging filter

Adding Destination-MAC Address Filtering Table Entries

From the ::filter=> prompt type the new command in the following format, then press
ENTER
.
new <macaddr> <srcport> <port,port,...>
Parameters
<macaddr>
The MAC address of the device for which the packet is destined. The MAC address format
is xx:xx:xx:xx:xx:xx where x is either a space, an integer ranging from 0 to 9 or a letter
ranging from a to f.
<srcport>
The source bridge session port.
<port,port,...>
The bridge session ports to which you want to allow frame forwarding from the specified
source port. To specify multiple ports, separate each port number with a comma.
Examples
::filter=> new 00:10:4b:24:15:a3 3 4,5,6,7,8
Avidia System Configuration and Management User Manual
D
ESTINATION
ORWARDING
Chapter 10: Configuring Bridging and Routing
-MAC A
DDRESS
)
ENTER to display the
245